3D Pro Multilayer
- Features
- zvishongedzo
- Tech Mhando
- Query Ruzivo
Features of 3D Pro Multilayer
3D Pro multilayer has been introduced into dental practice as an alternative to metal-ceramic dental restorations. Compared to the traditional porcelain to metal restorations
-
Inopindirana VITA® Classic Shade Match
Nyatsotevedzera VITA® Classic Shade kubva paR & D chikamu uye zvakare neyakajairwa kugadzirwa ine mumvuri mechi.
-
Glazed with Bloomden CeramStar® Glaze/Stain Kit
Preparation: 3D Pro 3-unit bridge after milled and sintered and then glazed.
-
Developed an improved flexural strength
The flexural strength of this new material is 650-1100 MPa. These conveniences have made the 3D Pro multilayer zirconia used more and more for crowns and bridges inlateral applications.
-
Excellent aesthetics performance
Translucency can be regulated by controlling the absorption, reflection, and transmission of light through the material. The translucency is higher when the reluctance is low and the transmission is high.
-
Compared to previous stage the strength as a trend
Bloomzir® 3D Pro multilayer zirconia is unlike any other zirconia, it can exhibit a strength range from 650MPa to 1100MPa which can cover posteriors and anteriors for both crowns and bridges including implant restorations.
-
Monoclinic resistance
Unique hydrolysis microstructure and chemical formulation by the hydrothermal treatment also resist degradation of aging which the cubic shifted to monoclinic state that can be observed in zirconia structure.
-
High speed sintering cycle
An excellent attributes is the fast sintering cycle which can ensure the strength, translucency and aging resistance simultaneously. The high-productivity sintering cycle allows for “inside furnace” time in 45 minutes.
-
Low Wear Rate
The average crystalline size of less than 0.5 μm and the Hydrolyzed powder properties are organized inside 3D Pro multilayer zirconia which enable 3D Pro multilayer zirconia to be long-term enamel wear behavior closed to the natural human teeth after several times of lab-test.
Accessories for 3D Pro Multilayer
-
CeramicStar® Glaze/Stain Gingival Set
Iine 4 masasi ega pamwe chete neakakosha zvinwiwa uye zvishongedzo. Iwo 3D paste akanyatso kugadziridzwa kuitira aesthetic kupedzisa uye chimiro chegingival-ruvara zvikamu zveceramic kudzoreredza, yakagadzirwa ne lithium disilicate uye 3D Pro Multilayer. Zvose zvikamu zveseti zvinowanikwawo mumwe nomumwe.
DZIDZA ZVIMWE -
CeramicStar® Glaze/Stain Vivid Set
Iyo ine 7 single masasi pamwe neakakosha zvinwiwa uye zvishongedzo. Iwo 2D paste akagadziridzwa zvakanyanya kune yekutanga aesthetic kupedzisa kweiyo ceramic kudzoreredza, yakagadzirwa ne lithium disilicate uye 3D Pro Multilayer. Zvose zvikamu zveseti zvinowanikwawo mumwe nomumwe.
DZIDZA ZVIMWE -
CeramicStar® Glaze/Stain Blossom Set
Iyo ine gumi nenomwe misa pamwe chete yakakosha zvinwiwa uye zvishongedzo. Iyo 17D uye 2D paste uye tsvina zvakagadziridzwa zvakanyanya kuti inyanzvi inoyevedza yekupedzisa kwe ceramic kudzoreredza, yakagadzirwa ne lithium disilicate uye 3D Pro Multilayer. Zvose zvikamu zveseti zvinowanikwawo mumwe nomumwe.
DZIDZA ZVIMWE
3D Pro Multilayer Technical Specifications
| Technical Magadzirirwo | |
|---|---|
| 3D Pro Multilayer | |
| ZrO2+HfO2+Y2O3 | ≥99% |
| Y2O3 | 4.5% -10% |
| Al2O3 | ＜ 0.15% |
| Density before sintering (g.cm-3) | 3.15 ± 0.05 |
| Density after sintering (g.cm-3) | 6.07 ± 0.02 |
| CTE (25-500°C) (K-1) | 10.5 ± 0.5 |
| Flexural simba mushure mekuita sintering (MPa) | ＞ 650 |
| Kuchembera pamusoro monoclinic phase content | ＜ 12% |
| Kutapurirana kwechiedza | ＜ 49% |
| Kemikari solubility mushure mekunyura (µg.cm-2) | <100 |
| Cytotoxicity | 0 Chikamu |
| Radioactivity (Bq.g-1) | <0.1 |
| Sintering tembiricha (°C) | 1500 |
| Systems | 98mm / 95mm / 92*75mm |
| ukobvu | 12m / 14mm / 16mm / 18mm 20mm/22mm/25mm |
| Mimvuri | A1 A2 A3 A3.5 A4 / B1 B2 B3 B4 C1 C2 C3 C4 / D2 D3 D4 / BL1 BL2 BL3 BL4 |
